volker@13: From C:\Users\volker\Documents\atmospheric_lidar_ghk volker@13: Running lidar_correction_ghk.py volker@13: Reading input file optic_input_example_lidar.py volker@13: for Lidar system: xx , example lidar volker@13: --- Input parameters: value ±error / ±steps ---------------------- volker@16: Laser: DOLP = 1.00000; rotation alpha = 0.0000± 2.0000/ 1 volker@13: Diatt., Tunpol, Retard., Rotation (deg) volker@13: Emitter 0.0000± 0.1000/ 0, 1.0000, 0±180/ 0, 0.0000± 1.0000/ 0 volker@16: Receiver 0.0000± 0.1000/ 1, 1.0000, 0±180/ 0, 0.0000± 0.5000/ 0 volker@16: Calibrator 0.9998± 0.0001/ 1, 0.4000, 0± 0/ 0, 0.0000± 0.1000/ 0 volker@13: --- Pol.-filter --- volker@16: ERT, RotT : 0.0010± 0.0010/ 1, 0.0000± 1.0000/ 1 volker@16: ERR, RotR : 0.0010± 0.0010/ 1, 90.0000± 1.0000/ 1 volker@13: --- PBS --- volker@16: TP,TS : 0.9500± 0.0100/ 1, 0.0200± 0.0100/ 1 volker@16: RP,RS : 0.0500± 0.0100/ 1, 0.9800± 0.0100/ 1 volker@13: DT,TT,DR,TR,Y : 0.9588, 0.4850, -0.9029, 0.5150, 1 volker@13: --- Combined PBS + Pol.-filter --- volker@16: DT,TT,DR,TR : 1.0000, 0.2427, -0.9999, 0.2578 volker@21: LDRCal during calibration in calibration range: 0.009± 0.005/ 1 volker@13: volker@13: Rotation Error Epsilon For Normal Measurements = False volker@13: linear polarizer before receiver volker@13: Parallel signal detected in transmitted channel volker@16: RS_RP_depend_on_TS_TP = False volker@13: volker@13: ======================================================================== volker@13: GR , GT , HR , HT , K(0.004), K(0.2) , K(0.45) volker@16: 1.90111, 1.95685,-1.90091, 1.95676, 0.93372, 0.94595, 0.95689 volker@13: ======================================================================== volker@13: LDRtrue, LDRsimx, LDRCorr volker@16: 0.00400, 0.00418, 0.00400 volker@16: 0.02000, 0.02068, 0.02000 volker@21: 0.10000, 0.10321, 0.10000 volker@21: 0.30000, 0.30952, 0.30000 volker@16: 0.45000, 0.46426, 0.45000