volker@13: From  C:\Users\volker\Documents\atmospheric_lidar_ghk
volker@13: Running  lidar_correction_ghk.py
volker@13: Reading input file  optic_input_example_lidar.py
volker@13: for Lidar system:  xx ,  example lidar
volker@13:  --- Input parameters: value ±error / ±steps  ----------------------
volker@13: Laser:   DOLP =    1.00000;         rotation alpha =   0.0000± 1.0000/ 1
volker@13:               Diatt.,             Tunpol,   Retard.,   Rotation (deg)
volker@13: Emitter       0.0000± 0.1000/ 0,  1.0000,   0±180/ 0,  0.0000± 1.0000/ 0
volker@13: Receiver      0.0000± 0.0100/ 1,  1.0000,   0±180/ 2,  0.0000± 0.5000/ 0
volker@13: Calibrator    0.9998± 0.0001/ 1,  0.5050,   0±  0/ 0,  0.0000± 0.1000/ 1
volker@13:  --- Pol.-filter ---
volker@13: ERT,     ERR    : 0.0001± 0.0001/ 1,  0.0001± 0.0001/ 1
volker@13: RotaT  , RotaR  : 0.0000± 1.0000/ 1, 90.0000± 1.0000/ 1
volker@13:  --- PBS ---
volker@13: TP,TS,RP,RS     : 0.9500± 0.0100/ 1,  0.0200± 0.0100/ 1,  0.0500± 0.0000/ 0, 0.9800± 0.0000/ 0
volker@13: DT,TT,DR,TR,Y   : 0.9588, 0.4850, -0.9029, 0.5150, 1
volker@13:  --- Combined PBS + Pol.-filter ---
volker@13: DT,TT,DR,TR     : 1.0000, 0.2425, -1.0000, 0.2575
volker@13: 
volker@13: Rotation Error Epsilon For Normal Measurements =  False
volker@13: linear polarizer before receiver
volker@13: Parallel signal detected in transmitted channel
volker@13: RS_RP_depend_on_TS_TP =  True
volker@13: LDRCal during calibration :  0.008±0.003/ 0
volker@13: 
volker@13: ========================================================================
volker@13:  GR     , GT     , HR     , HT     ,  K(0.004), K(0.2) ,  K(0.45)
volker@13:  1.90273, 1.95857,-1.90271, 1.95856,  0.93369,  0.94593,  0.95686
volker@13: ========================================================================
volker@13:   LDRtrue,  LDRsimx,  LDRCorr
volker@13:   0.00400,  0.00413,  0.00400
volker@13:   0.02000,  0.02064,  0.02000
volker@13:   0.20000,  0.20632,  0.20000
volker@13:   0.45000,  0.46422,  0.45000