SCC Documentation: docs/data_processing/uploading_ancillary.rst@5358586fe387 (annotated)

docs/data_processing/uploading_ancillary.rst@5358586fe387 (annotated)

docs/data_processing/uploading_ancillary.rst

Tue, 05 Apr 2022 12:16:26 +0200

author: Giuseppe D'Amico <giuseppe.damico@imaa.cnr.it>
date: Tue, 05 Apr 2022 12:16:26 +0200
changeset 143: 5358586fe387
parent 49: 815fe2598c15
permissions: -rw-r--r--

Added missing variables in HiRELPP product

 .. _uploading_ancillary:
 Ancillary files
 ===============
 Together with your measurement data, you can submit ancillary files that will
 be used in the processing procedure. The files that are currently supported
 are **sounding files**, **overlap files**, and **lidar ratio files**.
 These files can be submitted either together with a measurement, using the
 "Quick upload" form, or on their own, using the "Upload ancillary" form. Both
 methods are equivalent and will not affect which files is used for processing
 your measurements. The file that will be used are defined in the *measurement
 file* using the appropriate attributes as described in the :ref:`netcdf_file`
 section.
 If one of your measurements requires ancillary files for its processing, the
 actual processing of the data will start only after all the required files
 have been uploaded. The files that are missing will appear in the ancillary file
 list with "Missing" status. When all these files have been uploaded the
 processing of the measurement will start automatically.
 Upload ancillary
 ----------------
 In the "Upload ancillary" form you need to specify to submit at least one
 ancillary file.
 Form fields
 ~~~~~~~~~~~
 Station (Required)
     You need to specify the EARLINET station that is related to this file. In
     most cases you will just have to select your station.
 Sounding file (Optional)
    In this optional field you can submit a sounding file that will be used
    by your measurements in the processing. The file needs to follow the netCDF
    file format specified in the pdf file found in the :ref:`netcdf_file` section.
    The file you submit will not be  necessarily connected with the
    submitted measurement; which sounding file will be used in the processing of
    each measurement is specified in the measurement's file. The file you upload
    will, nevertheless, remain on the SCC and will be used whenever needed.
 Overlap file (Optional)
    In this optional field you can submit a overlap file that will be used
    by your measurements in the processing. The file needs to follow the netCDF
    file format specified in the pdf file found in the :ref:`netcdf_file` section.
    The file you submit will not be  necessarily connected with the
    submitted measurement; which overlap file will be used in the processing of
    each measurement is specified in the measurement's file. The file you upload
    will, nevertheless, remain on the SCC and will be used whenever needed.
 Lidar ratio file (Optional)
    In this optional field you can submit a lidar ratio file that will be used
    by your measurements in the processing. The file needs to follow the netCDF
    file format specified in the pdf file found in the :ref:`netcdf_file` section.
    The file you submit will not be  necessarily connected with the
    submitted measurement; which lidar ratio file will be used in the processing
    of each measurement is specified in the measurement's file. The file you
    upload will, nevertheless, remain on the SCC and will be used whenever needed.
 Form Validation
 ~~~~~~~~~~~~~~~
 The aim of form validation is to detect errors in your submitted data as early
 as possible. In this way you can save time by correcting errors before the
 processing of your data fails.
 When the files are submitted the following checks are performed:
 * At least one file needs to be submitted.
 * The submitted measurement file should have the correct netCDF format. All
   mandatory variables and attributes should be present in the file. All
   variables and attributes should have the correct type (float, integer, etc).
 * A file with the same filename should not exist in the SCC or, if it exists,
   it should have status "Missing" or "Error". If a file with the same filename
   exists, and its status is "OK" the submitted file is rejected.
 Browse ancillary files
 ----------------------
 You can browse existing and missing ancillary files in the "Ancillary files"
 page of the Data processing sub menu.
 You can filter the results of the list using the **Filter** box above the form.
 The filter searches for matches in all columns of the table, i.e you can use it
 to filter the results by filename, stations, data, and status.
 You can view more information about the ancillary file following the link on the
 name of the file.
 .. _ancillary_details:
 View ancillary file details
 ---------------------------
 In the ancillary file status page you can view more detailed information about
 the selected file. The following info are provided.
 Status
    The status of the file can have three values. **Ok** means that the file
    has been uploaded successfully and is ready to be used in the processing.
    **Missing** status means that one or more of the submitted measurements
    have requested this file, but the file has not been submitted yet. An
    **Error** status indicates that the file has been submitted but there was
    an error while reading its content; you will need to correct its content
    and resubmit the file.
 Interpolation
    This indicates the interpolation type that will be used on the content of
    the ancillary file. You can change the interpolation type in the admin
    section following the "Edit in admin" link in the File actions sub menu.
    The algorithms currently implemented are "Linear interpolation" and
    "Natural Cubic Spline". If no value is selected the natural cubic spline
    algorithm will be used.
 Station
    The EARLINET station that is the related to this ancillary file
 Submitted on
    The date and time that the file was submitted. If the file is missing, but is
    required by an uploaded measurement, this date indicated the date and time
    of the measurement upload.
 At the bottom part of the page you can see  a list of **Related measurements**.
 These are measurements that use the specific ancillary file for their
 processing.

Mercurial > public > sccdocs / annotate

docs/data_processing/uploading_ancillary.rst@5358586fe387 (annotated)

docs/data_processing/uploading_ancillary.rst