SCC Documentation: docs/tutorial/adding_telescopelaser.rst@9780f6e74200 (annotated)

docs/tutorial/adding_telescopelaser.rst@9780f6e74200 (annotated)

docs/tutorial/adding_telescopelaser.rst

Thu, 03 Nov 2016 16:27:54 +0200

author: Michael Kottas <mike.kottas@gmail.com>
date: Thu, 03 Nov 2016 16:27:54 +0200
changeset 85: 9780f6e74200
parent 16: 5ffb18491f41
child 110: 0964f87e239a
permissions: -rw-r--r--

Merge from 83:44e5ebae6813

 Adding equipment
 ================
 After adding a system to the database, we need to add at least one telescope and one laser before you add a channel.
 Telescope
 ---------
 To add a new telescope, click on the **HOI telescopes** in the *System settings* panel.
 This will take you to a page with a list of all available telescopes that are connected with your station.
 This list should be empty if this is the first time you add a telescope.
 To add a new telescope to the database click on **Add HOI telescope** at the top right of the screen.
 This will take you to a new page were you can fill in the needed information. Once again, the fields in **bold**
 are mandatory and you will need to fill them before you can save you new telescope.
 The fields you need to add are:
 Type
    The telescope type
 Diameter
    The diameter of the primary mirror in mm
 Focal length
    The equivalent focal length of the telescope in mm
 Full overlap height
    The height where the full overlap is achieved.
 When you are done, press the **save** button at the bottom right of the page. If no errors are present, you will return to
 the telescope list page. Your new telescope should appear in the list.
 Laser
 -----
 To add a new laser, click on the **HOI Laser** in the *System settings* panel.
 This will take you to a page with a list of all available lasers that are connected with your station.
 This list should be empty if this is the first time you add a laser.
 To add a new telescope to the database click on **Add HOI laser** at the top right of the screen.
 This will take you to a new page were you can fill in the needed information. The fields in **bold**
 are mandatory and you will need to fill them before you can save you new telescope.
 The fields you need to add are:
 Manufacturer
    The manufacturer of the telescope
 Model
    The model of the telescope
 Repetition rate
    The repetition rate in Hz
 Type
    The type of the laser (ex. Nd:YAG)
 When you are done, press the **save** button at the bottom right of the page. If no errors are present,  you will return to
 the laser list page. The new laser you added should be present there.

Mercurial > public > sccdocs / annotate

docs/tutorial/adding_telescopelaser.rst@9780f6e74200 (annotated)

docs/tutorial/adding_telescopelaser.rst