SCC Documentation: docs/data_processing/pre_exit_codes.rst@c782e3130fbc (annotated)

docs/data_processing/pre_exit_codes.rst@c782e3130fbc (annotated)

docs/data_processing/pre_exit_codes.rst

Mon, 06 Feb 2017 14:01:54 +0200

author: Iannis <ulalume3@yahoo.com>
date: Mon, 06 Feb 2017 14:01:54 +0200
changeset 98: c782e3130fbc
parent 59: 3ed8c585de91
child 129: a059b0d40a80
permissions: -rw-r--r--

Updating index.

 Preprocessor exit codes
 =======================
 After a measurement is processed by the preprocessor, an exit code is provided
 that can help you understand if everything went OK, and if not, what was the problem.
 The implemented exit codes are the following.
 
    Finished without errors
 
    Configuration file not found
 
    Configuration file error: INPUT_DIR not defined
 
    Configuration file error: OUTPUT_DIR not defined
 
    Configuration file error: Cannot read in INPUT_DIR
 
    Configuration file error: Cannot write on OUTPUT_DIR
 
    Configuration file error: Cannot read in SOUNDINGS_DIR
 
    Configuration file error: Cannot write on LOG_DIR
 
    Unable to use Poisson statistic in Montecarlo simulation. Found not integer values
 
    Found mismatch among usecase, product type and given channels
 
    Found range resolution in raw lidar data greater than the value in database
 
    Found wrong value(s) for variable 'Dead_Time_Corr_Type' in NetCDF file or in SCC_DB
 
    Found negative number of counts in lidar data! Note: This error could also
    result when photocounting values are not compatible with the used dead time
    correction value.
 
    Found wrong value(s) in variable 'Raw_Bck_Start_Time' end/or 'Raw_Bck_Stop_Time' and/or in laser repetition rate value
 
    Background profiles don't contain the same number of valid data point of the lidar data
 
    Natural cubic spline interpolation not possible
 
    Cannot calculate errors using Montecarlo simulation within trigger delay correction
 
    Linear interpolation not possible
 
    lfit: no parameters to be fitted
 
    gaussj: Singular Matrix
 
    Found wrong value(s) for variable 'Background_Mode' in NetCDF file of in SCC_DB
 
    Too few lidar profiles or integration time too mutch small
 
    Cannot calculate the errors after time integration
 
    Found timescales not synchronized
 
    Cannot calculate errors using Montecarlo simulation within interpolation routine
 
    Error: Gluing between analog and pc signal not possible. No suitable overlap region can found
 
    Error: Gluing between analog and pc signal not possible. Poor linear correlation
 
    Error: Gluing between analog and pc signal not possible. Too noisy signal(s)
 
    Error: Gluing between analog and pc signal not possible. Slope test not passed
 
    Error: Gluing between pc signals not possible. No suitable overlap region can found
 
    Error: Gluing between pc signals not possible. Poor linear correlation
 
    Error: Gluing between pc signals not possible. Too noisy signal(s)
 
    Error: Gluing between pc signals not possible. Slope test not passed
 
    Found wrong value(s) for scattering type id
 
    Found wrong value(s) for detection type id
 
    Found wrong value(s) for range type id
 
    Too few lidar points to calculate atmospheric background. At least 10 lidar rangebins are required within the background subtraction range
 
    Raw time resolution is greater than the selected integration time
 
    Gluing between analog and pc signal not possible. Too large difference between signals in gluing point.
 
    Gluing between pc signals not possible. Too large difference between signals in gluing point.
 
    One or more mandatory datetime field(s) are not set into the database
 
    Measurement_ID not unique in the selected database
 
    Measurement ID not found in the selected database
 
    Failed in fetching query of SCC_DB
 
    Integration time must be a positive integer
 
    Unknown usecase
 
    Unknown product type
 
    Found error(s) in SCC_DB for the submitted Measurement_ID. This could occur,
    for example, if the used system does not have any product associated with.
 
    Failed in quering SCC_DB
 
    Cannot connect to SCC_DB
 
    Overlap file not registered in the database. Please register it and then re-run the SCC
 
    Overlap file not registered in the database. Please register it and then re-run the SCC
 
    Sounding file not registered in the database. Please register it and then re-run the SCC
 
    Raw Data NetCDF input file not found
 
    Dimension 'time' not found in Raw Data NetCDF input file
 
    Dimension 'channels' not found in Raw Data NetCDF input file
 
    Dimension 'points' not found in Raw Data NetCDF input file
 
    Dimension 'nb_of_time_scales' not found in Raw Data NetCDF input file
 
    Dimension 'scan_angles' not found in Raw Data NetCDF input file
 
    Global attribute 'Measurement_ID' not found in Raw Data NetCDF input file
 
    Incorrect definition of global attribute 'Measurement_ID' in Raw Data NetCDF input file
 
    Global attribute 'RawData_Start_Date' not found in Raw Data NetCDF input file
 
    Incorrect definition of global attribute 'RawData_Start_Date' in Raw Data NetCDF input file
 
    Global attribute 'RawData_Start_Time_UT' not found in Raw Data NetCDF input file
 
    Incorrect definition of global attribute 'RawData_Start_Time_UT' in Raw Data NetCDF input file
 
    Variable 'channel_ID' not found and/or not  defined correctly in the Raw Data NetCDF input file
 
    Missing one or more channels in NetCDF input file
 
    Variable 'Background_Low' not found and/or not  defined correctly in the Raw Data NetCDF input file
 
    Variable 'Background_High' not found and/or not  defined correctly in the Raw Data NetCDF input file
 
    Variable 'id_timescale' not found and/or not  defined correctly in the Raw Data NetCDF input file
 
    Variable 'Raw_Data_Start_Time' not found and/or not  defined correctly in the Raw Data NetCDF input file
 
    Variable 'Raw_Data_Stop_Time' not found and/or not  defined correctly in the Raw Data NetCDF input file
 
    Variable 'Raw_Lidar_Data' not found and/or not  defined correctly in the Raw Data NetCDF input file
 
    Variable 'Laser_Pointing_Anlge' not found and/or not  defined correctly in the Raw Data NetCDF input file
 
    Variable 'Laser_Pointing_Angle_of_Profiles' not found and/or not  defined correctly in the Raw Data NetCDF input file
 
    Variable 'Laser_Shots' not found and/or not  defined correctly in the Raw Data NetCDF input file
 
    Variable 'Molecular_Calc' not found and/or not  defined correctly in the Raw Data NetCDF input file
 
    Global attribute 'Sounding_File_Name' not found in the Raw Data NetCDF input file
 
    Variable 'Molecular_Calc' has not valid value
 
    Variable 'Pressure_at_Lidar_Station' not found and/or not  defined correctly in the Raw Data NetCDF input file
 
    Variable 'Temperature_at_Lidar_Station' not found and/or not  defined correctly in the Raw Data NetCDF input file
 
    Laser pointing angle cannot be undefined
 
    Cannot found variable 'LR_Input' within NetCDF input file. This variable is mandatory for elastic backscatter retrievals
 
    Found invalid value(s) for Variable 'LR_Input'
 
    Global attribute 'LR_File_Name' not found in the Raw Data NetCDF input file
 
    Variable 'Raw_Bck_Start_Time' not found and/or not  defined correctly in the Raw Data NetCDF input file
 
    Variable 'Raw_Bck_Stop_Time' not found and/or not  defined correctly in the Raw Data NetCDF input file
 
    Global attribute 'RawBck_Start_Date' not found in the Raw Data NetCDF input file
 
    Global attribute 'RawBck_Start_Time_UT' not found in the Raw Data NetCDF input file
 
    Global attribute 'RawBck_Stop_Time_UT' not found in the Raw Data NetCDF input file
 
    Global attribute 'RawData_Stop_Time_UT' not found in Raw Data NetCDF input file
 
    Incorrect definition of global attribute 'RawData_Stop_Time_UT' in Raw Data NetCDF input file
 
    Sounding NetCDF input file not found
 
    Dimension 'points' not found in Sounding NetCDF input file
 
    Global attribute 'Sounding_Start_Date' not found in the Sounding NetCDF input file
 
    Global attribute 'Sounding_Start_Time' not found in the Sounding NetCDF input file
 
    Global attribute 'Latitude_degrees_north' not found in the Sounding NetCDF input file
 
    Global attribute 'Longitude_degrees_east' not found in the Sounding NetCDF input file
 
    Global attribute 'Altitude_meter_asl' not found in the Sounding NetCDF input file
 
    Variable 'Altitude' not found and/or not  defined correctly in the Souding NetCDF input file
 
    Variable 'Temperature' not found and/or not  defined correctly in the Souding NetCDF input file
 
    Variable 'Pressure' not found and/or not  defined correctly in the Souding NetCDF input file
 
    Overlap NetCDF input file not found
 
    Dimension 'points' not found in Overlap NetCDF input file
 
    Dimension 'channels' not found in Overlap NetCDF input file
 
    Global attribute 'Lidar_Station_Name' not found in the Overlap NetCDF input file
 
    Global attribute 'Overlap_Measurement_Date' not found in the Overlap NetCDF input file
 
    Variable 'Altitude' not found and/or not  defined correctly in the Overlap NetCDF input file
 
    Variable 'channel_ID' not found and/or not  defined correctly in the Overlap NetCDF input file
 
    Variable 'Overlap_Function' not found and/or not  defined correctly in the Overlap NetCDF input file
 
    Lidar ratio NetCDF input file not found
 
    Dimension 'points' not found in lidar ratio NetCDF input file
 
    Dimension 'products' not found in lidar ratio NetCDF input file
 
    Global attribute 'Lidar_Station_Name' not found in the lidar ratio NetCDF input file
 
    Variable 'Altitude' not found and/or not  defined correctly in the lidar ratio NetCDF input file
 
    Variable 'product_ID' not found and/or not  defined correctly in the lidar ratio NetCDF input file
 
    Variable 'Lidar_Ratio' not found and/or not  defined correctly in the lidar ratio NetCDF input file
 
    Variable 'product_id' in the lidar ratio NetCDF input file contains data that are not consistent with the SCC database values
 
    Variable 'Lidar_Ratio' in the lidar ratio NetCDF input file contains undefined values within the valid altitude range defined by the corresponding product. Please remove them.
 
    Found negative or not defined value in 'Laser_Shots' array
 
    Variable 'DAQ_Range' not found and/or not  defined correctly in the Raw Data NetCDF input file
 
    Cannot find variable 'Depolarization_Factor' within NetCDF input file. This variable is mandatory for Raman and elastic backscatter retrievals if only cross and parallel elastic components are given
 
    Wrong or undefined value for variable 'Depolarization_Factor' within NetCDF input file. This variable is mandatory for Raman and elastic backscatter retrievals if only cross and parallel elastic components are given
 
    Found wrong value(s) for variable 'First_Signal_Rangebin'
 
    Found wrong value(s) in variable 'Background_Low' end/or 'Background_High'
 
    Cannot write intermediate NetCDF file
 
    Sounding file error: 'Altitude' array should contain altitudes in ascending order (from the lowest point to the highest one)
 
    Overlap file error: 'Altitude' array should contain altitudes in ascending order (from the lowest point to the highest one)
 
    Lidarratio file error: 'Altitude' array should contain altitudes in ascending order (from the lowest point to the highest one)
 
    Found not integer values in photoncounting signal
 
    Dimension 'time' cannot be zero
 
    Dimension 'channel' cannot be zero
 
    Dimension 'points' cannot be zero
 
    Timeout

Mercurial > public > sccdocs / annotate

docs/data_processing/pre_exit_codes.rst@c782e3130fbc (annotated)

docs/data_processing/pre_exit_codes.rst