comparison: docs/details/adding_products.rst
docs/details/adding_products.rst
- changeset 22
- 819d26010f63
- parent 11
- 79fea4145278
equal
deleted
inserted
replaced
| 21:bc0a96e2c272 | 22:819d26010f63 |
|---|---|
| 1 Adding products | 1 Adding products |
| 2 =============== | 2 =============== |
| 3 | |
| 4 Depending on the product you need to produce, some of the following tables need to be filled. | |
| 5 | |
| 6 .. note:: | |
| 7 | |
| 8 This section is not up-to-date to the latest interface version. It will be updated shortly. | |
| 9 | |
| 10 | |
| 11 Backscatter products | |
| 12 -------------------- | |
| 13 The following tables need to be filed for the various backscatter products. | |
| 14 | |
| 15 Backscatter calibrations | |
| 16 ------------------------ | |
| 17 For backscatter (product types: Raman backscatter, Combined Raman backscatter and extinction, Elastic backscatter retrieval | |
| 18 | |
| 19 LowestHeight | |
| 20 in meters, lowest height for reference height search | |
| 21 | |
| 22 TopHeight | |
| 23 in meters, maximum height for reference height search | |
| 24 | |
| 25 WindowWidth | |
| 26 in meters, width of the reference height interval | |
| 27 | |
| 28 calValue | |
| 29 backscatter ratio, e.g. 1 or 1.01 | |
| 30 | |
| 31 calRangeSearchMethod ID: | |
| 32 always 0 | |
| 33 | |
| 34 | |
| 35 If done, you have to remember the ID for your backscatter calibration options an go the the specific tables below, | |
| 36 | |
| 37 for product type 0 and 2: Raman_backscatter_options | |
| 38 --------------------------------------------------- | |
| 39 | |
| 40 Raman calculation method | |
| 41 at the moment, only 1 | |
| 42 | |
| 43 bsc cal options | |
| 44 insert ID from previous step | |
| 45 | |
| 46 error method ID: | |
| 47 at the moment, only 1 | |
| 48 | |
| 49 for product type 3: elast_backscatter_options | |
| 50 ----------------------------------------------- | |
| 51 | |
| 52 elast bsc method ID | |
| 53 at the moment, only 1 (iterative approach) | |
| 54 | |
| 55 bsc cal options | |
| 56 insert ID from previous step | |
| 57 | |
| 58 error method ID: | |
| 59 at the moment, only 1 | |
| 60 | |
| 61 lr input id: | |
| 62 at the moment, only 1 (fixed LR) | |
| 63 | |
| 64 fixed_lr | |
| 65 ... in sr, value of the used lidar ratio | |
| 66 | |
| 67 iter_bsc_options | |
| 68 if, iterative approach is used, go to table iter_bsc_options and remember ID and insert here | |
| 69 | |
| 70 iter_bsc_options | |
| 71 ---------------- | |
| 72 | |
| 73 iter conv crit | |
| 74 ...e.g. 0.1 (=10%) The iteration is stopped when the RELATIVE difference between the actual and the previous column integrated backscatter coefficients is below this value | |
| 75 | |
| 76 ram bsc method id | |
| 77 at the moment, only 1 | |
| 78 | |
| 79 max iteration count: | |
| 80 maximum number of iteration steps | |
| 81 | |
| 82 for product type 1: Extinction options | |
| 83 -------------------------------------- | |
| 84 | |
| 85 Extinction method: | |
| 86 Standard: 1, (0 weighted linear fit, 1 non-weighted linear fit, 2 difference quotient, 3 polynomial sec order fit, 4 quadratic function, 5 Savitzky-Golay filter, 6 Russo) | |
| 87 | |
| 88 error method ID: | |
| 89 at the moment, only 1 | |
| 90 | |
| 91 overlap file ID: | |
| 92 if overlap file is available, enter ID here | |
| 93 | |
| 94 angstroem: | |
| 95 used angström value for the extinction calculation, e.g. 0,1, or 1.5 | |
| 96 | |
| 97 for product type 2: Ext bsc options | |
| 98 ----------------------------------- | |
| 99 | |
| 100 product ID | |
| 101 ID of product type 2 | |
| 102 | |
| 103 extinction option product ID | |
| 104 ID of the extinction product (see table products) | |
| 105 | |
| 106 raman backscatter options product ID | |
| 107 ID of the Raman backscatter product (see table products) | |
| 108 | |
| 109 error method ID: | |
| 110 at the moment, only 1 | |
| 111 |
