Mercurial > public > sccdocs / file revision

Preprocessor exit codes
=======================
After a measurement is processed by the preprocessor, an exit code is provided
that can help you understand if everything went OK, and if not, what was the problem.
The implemented exit codes are the following.
 
0
   Finished without errors

2
   Configuration file not found

3
   Configuration file error: INPUT_DIR not defined

4
   Configuration file error: OUTPUT_DIR not defined

5
   Configuration file error: Cannot read in INPUT_DIR

6
   Configuration file error: Cannot write on OUTPUT_DIR

7
   Configuration file error: Cannot read in SOUNDINGS_DIR

8
   Configuration file error: Cannot write on LOG_DIR

9
   Unable to use Poisson statistic in Montecarlo simulation. Found not integer values

20
   Found mismatch among usecase, product type and given channels

21
   Found range resolution in raw lidar data greater than the value in database

22
   Found wrong value(s) for variable 'Dead_Time_Corr_Type' in NetCDF file or in SCC_DB

23
   Found negative number of counts in lidar data! Note: This error could also 
   result when photocounting values are not compatible with the used dead time 
   correction value. 

24
   Found wrong value(s) in variable 'Raw_Bck_Start_Time' end/or 'Raw_Bck_Stop_Time' and/or in laser repetition rate value

25
   Background profiles don't contain the same number of valid data point of the lidar data

26
   Natural cubic spline interpolation not possible

27
   Cannot calculate errors using Montecarlo simulation within trigger delay correction

28
   Linear interpolation not possible

29
   lfit: no parameters to be fitted

30
   gaussj: Singular Matrix

31
   Found wrong value(s) for variable 'Background_Mode' in NetCDF file of in SCC_DB

32
   Too few lidar profiles or integration time too mutch small

33
   Cannot calculate the errors after time integration

34
   Found timescales not synchronized

35
   Cannot calculate errors using Montecarlo simulation within interpolation routine

36
   Error: Gluing between analog and pc signal not possible. No suitable overlap region can found

37
   Error: Gluing between analog and pc signal not possible. Poor linear correlation

38
   Error: Gluing between analog and pc signal not possible. Too noisy signal(s)

39
   Error: Gluing between analog and pc signal not possible. Slope test not passed

40
   Error: Gluing between pc signals not possible. No suitable overlap region can found

41
   Error: Gluing between pc signals not possible. Poor linear correlation

42
   Error: Gluing between pc signals not possible. Too noisy signal(s)

43
   Error: Gluing between pc signals not possible. Slope test not passed

44
   Found wrong value(s) for scattering type id

45
   Found wrong value(s) for detection type id

46
   Found wrong value(s) for range type id

47
   Too few lidar points to calculate atmospheric background. At least 10 lidar rangebins are required within the background subtraction range

48
   Raw time resolution is greater than the selected integration time

49
   Gluing between analog and pc signal not possible. Too large difference between signals in gluing point.

50
   Gluing between pc signals not possible. Too large difference between signals in gluing point.

70
   One or more mandatory datetime field(s) are not set into the database

71
   Measurement_ID not unique in the selected database

72
   Measurement ID not found in the selected database

73
   Failed in fetching query of SCC_DB

74
   Integration time must be a positive integer

75
   Unknown usecase

76
   Unknown product type

77
   Found error(s) in SCC_DB for the submitted Measurement_ID. This could occur,
   for example, if the used system does not have any product associated with.

78
   Failed in quering SCC_DB

79
   Cannot connect to SCC_DB

80
   Overlap file not registered in the database. Please register it and then re-run the SCC

81
   Overlap file not registered in the database. Please register it and then re-run the SCC

82
   Sounding file not registered in the database. Please register it and then re-run the SCC

100
   Raw Data NetCDF input file not found

101
   Dimension 'time' not found in Raw Data NetCDF input file

102
   Dimension 'channels' not found in Raw Data NetCDF input file

103
   Dimension 'points' not found in Raw Data NetCDF input file

104
   Dimension 'nb_of_time_scales' not found in Raw Data NetCDF input file

105
   Dimension 'scan_angles' not found in Raw Data NetCDF input file

106
   Global attribute 'Measurement_ID' not found in Raw Data NetCDF input file

107
   Incorrect definition of global attribute 'Measurement_ID' in Raw Data NetCDF input file

108
   Global attribute 'RawData_Start_Date' not found in Raw Data NetCDF input file

109
   Incorrect definition of global attribute 'RawData_Start_Date' in Raw Data NetCDF input file

110
   Global attribute 'RawData_Start_Time_UT' not found in Raw Data NetCDF input file

111
   Incorrect definition of global attribute 'RawData_Start_Time_UT' in Raw Data NetCDF input file

112
   Variable 'channel_ID' not found and/or not  defined correctly in the Raw Data NetCDF input file

113
   Missing one or more channels in NetCDF input file

114
   Variable 'Background_Low' not found and/or not  defined correctly in the Raw Data NetCDF input file

115
   Variable 'Background_High' not found and/or not  defined correctly in the Raw Data NetCDF input file

116
   Variable 'id_timescale' not found and/or not  defined correctly in the Raw Data NetCDF input file

117
   Variable 'Raw_Data_Start_Time' not found and/or not  defined correctly in the Raw Data NetCDF input file

118
   Variable 'Raw_Data_Stop_Time' not found and/or not  defined correctly in the Raw Data NetCDF input file

119
   Variable 'Raw_Lidar_Data' not found and/or not  defined correctly in the Raw Data NetCDF input file

120
   Variable 'Laser_Pointing_Anlge' not found and/or not  defined correctly in the Raw Data NetCDF input file

121
   Variable 'Laser_Pointing_Angle_of_Profiles' not found and/or not  defined correctly in the Raw Data NetCDF input file

122
   Variable 'Laser_Shots' not found and/or not  defined correctly in the Raw Data NetCDF input file

123
   Variable 'Molecular_Calc' not found and/or not  defined correctly in the Raw Data NetCDF input file

124
   Global attribute 'Sounding_File_Name' not found in the Raw Data NetCDF input file

125
   Variable 'Molecular_Calc' has not valid value

126
   Variable 'Pressure_at_Lidar_Station' not found and/or not  defined correctly in the Raw Data NetCDF input file

127
   Variable 'Temperature_at_Lidar_Station' not found and/or not  defined correctly in the Raw Data NetCDF input file

128
   Laser pointing angle cannot be undefined

129
   Cannot found variable 'LR_Input' within NetCDF input file. This variable is mandatory for elastic backscatter retrievals

130
   Found invalid value(s) for Variable 'LR_Input'

131
   Global attribute 'LR_File_Name' not found in the Raw Data NetCDF input file

132
   Variable 'Raw_Bck_Start_Time' not found and/or not  defined correctly in the Raw Data NetCDF input file

133
   Variable 'Raw_Bck_Stop_Time' not found and/or not  defined correctly in the Raw Data NetCDF input file

134
   Global attribute 'RawBck_Start_Date' not found in the Raw Data NetCDF input file

135
   Global attribute 'RawBck_Start_Time_UT' not found in the Raw Data NetCDF input file

136
   Global attribute 'RawBck_Stop_Time_UT' not found in the Raw Data NetCDF input file

137
   Global attribute 'RawData_Stop_Time_UT' not found in Raw Data NetCDF input file

138
   Incorrect definition of global attribute 'RawData_Stop_Time_UT' in Raw Data NetCDF input file

139
   Sounding NetCDF input file not found

140
   Dimension 'points' not found in Sounding NetCDF input file

141
   Global attribute 'Sounding_Start_Date' not found in the Sounding NetCDF input file

142
   Global attribute 'Sounding_Start_Time' not found in the Sounding NetCDF input file

143
   Global attribute 'Latitude_degrees_north' not found in the Sounding NetCDF input file

144
   Global attribute 'Longitude_degrees_east' not found in the Sounding NetCDF input file

145
   Global attribute 'Altitude_meter_asl' not found in the Sounding NetCDF input file

146
   Variable 'Altitude' not found and/or not  defined correctly in the Souding NetCDF input file

147
   Variable 'Temperature' not found and/or not  defined correctly in the Souding NetCDF input file

148
   Variable 'Pressure' not found and/or not  defined correctly in the Souding NetCDF input file

149
   Overlap NetCDF input file not found

150
   Dimension 'points' not found in Overlap NetCDF input file

151
   Dimension 'channels' not found in Overlap NetCDF input file

152
   Global attribute 'Lidar_Station_Name' not found in the Overlap NetCDF input file

153
   Global attribute 'Overlap_Measurement_Date' not found in the Overlap NetCDF input file

154
   Variable 'Altitude' not found and/or not  defined correctly in the Overlap NetCDF input file

155
   Variable 'channel_ID' not found and/or not  defined correctly in the Overlap NetCDF input file

156
   Variable 'Overlap_Function' not found and/or not  defined correctly in the Overlap NetCDF input file

157
   Lidar ratio NetCDF input file not found

158
   Dimension 'points' not found in lidar ratio NetCDF input file

159
   Dimension 'products' not found in lidar ratio NetCDF input file

160
   Global attribute 'Lidar_Station_Name' not found in the lidar ratio NetCDF input file

161
   Variable 'Altitude' not found and/or not  defined correctly in the lidar ratio NetCDF input file

162
   Variable 'product_ID' not found and/or not  defined correctly in the lidar ratio NetCDF input file

163
   Variable 'Lidar_Ratio' not found and/or not  defined correctly in the lidar ratio NetCDF input file

164
   Variable 'product_id' in the lidar ratio NetCDF input file contains data that are not consistent with the SCC database values

165
   Variable 'Lidar_Ratio' in the lidar ratio NetCDF input file contains undefined values within the valid altitude range defined by the corresponding product. Please remove them.

166
   Found negative or not defined value in 'Laser_Shots' array

167
   Variable 'DAQ_Range' not found and/or not  defined correctly in the Raw Data NetCDF input file

169
   Cannot find variable 'Depolarization_Factor' within NetCDF input file. This variable is mandatory for Raman and elastic backscatter retrievals if only cross and parallel elastic components are given

170
   Wrong or undefined value for variable 'Depolarization_Factor' within NetCDF input file. This variable is mandatory for Raman and elastic backscatter retrievals if only cross and parallel elastic components are given


171
   Found wrong value(s) for variable 'First_Signal_Rangebin'

172
   Found wrong value(s) in variable 'Background_Low' end/or 'Background_High'

173
   Cannot write intermediate NetCDF file

174
   Sounding file error: 'Altitude' array should contain altitudes in ascending order (from the lowest point to the highest one)

175
   Overlap file error: 'Altitude' array should contain altitudes in ascending order (from the lowest point to the highest one)

176
   Lidarratio file error: 'Altitude' array should contain altitudes in ascending order (from the lowest point to the highest one)

177
   Found not integer values in photoncounting signal

178
   Dimension 'time' cannot be zero

179
   Dimension 'channel' cannot be zero

180
   Dimension 'points' cannot be zero

255
   Timeout