binietoglou@6: Adding equipment
binietoglou@6: ================
binietoglou@6: 
binietoglou@6: After adding a system to the database, we need to add at least one telescope and one laser before you add a channel. 
binietoglou@6: 
binietoglou@6: Telescope
binietoglou@6: ---------
binietoglou@6: 
binietoglou@6: To add a new telescope, click on the **HOI telescopes** in the *System settings* panel.
binietoglou@16: This will take you to a page with a list of all available telescopes that are connected with your station. 
binietoglou@6: This list should be empty if this is the first time you add a telescope. 
binietoglou@6: 
binietoglou@6: To add a new telescope to the database click on **Add HOI telescope** at the top right of the screen.
binietoglou@6: This will take you to a new page were you can fill in the needed information. Once again, the fields in **bold**
binietoglou@6: are mandatory and you will need to fill them before you can save you new telescope. 
binietoglou@6: 
binietoglou@6: 
binietoglou@6: The fields you need to add are:
binietoglou@6: 
binietoglou@6: Type
binietoglou@6:    The telescope type
binietoglou@6:    
binietoglou@6: Diameter
binietoglou@6:    The diameter of the primary mirror in mm
binietoglou@6: 
binietoglou@6: Focal length
binietoglou@6:    The equivalent focal length of the telescope in mm
binietoglou@6:    
binietoglou@6: Full overlap height
binietoglou@6:    The height where the full overlap is achieved.
binietoglou@6: 
binietoglou@6: When you are done, press the **save** button at the bottom right of the page. If no errors are present, you will return to 
binietoglou@6: the telescope list page. Your new telescope should appear in the list.
binietoglou@6: 
binietoglou@6: 
binietoglou@6: Laser
binietoglou@6: -----
binietoglou@6: 
binietoglou@6: To add a new laser, click on the **HOI Laser** in the *System settings* panel.
binietoglou@16: This will take you to a page with a list of all available lasers that are connected with your station. 
binietoglou@6: This list should be empty if this is the first time you add a laser. 
binietoglou@6: 
binietoglou@6: To add a new telescope to the database click on **Add HOI laser** at the top right of the screen.
binietoglou@6: This will take you to a new page were you can fill in the needed information. The fields in **bold**
binietoglou@6: are mandatory and you will need to fill them before you can save you new telescope.
binietoglou@6: 
binietoglou@6: The fields you need to add are:
binietoglou@6: 
binietoglou@6: Manufacturer
ulalume3@110:    The manufacturer of the laser
binietoglou@6:    
binietoglou@6: Model
ulalume3@110:    The model of the laser
binietoglou@6:    
binietoglou@6: Repetition rate
binietoglou@6:    The repetition rate in Hz
binietoglou@6:    
binietoglou@6: Type
binietoglou@6:    The type of the laser (ex. Nd:YAG)
binietoglou@6: 
binietoglou@6: When you are done, press the **save** button at the bottom right of the page. If no errors are present,  you will return to 
binietoglou@6: the laser list page. The new laser you added should be present there.
binietoglou@6: 
binietoglou@6: