ulalume3@11: ulalume3@11: ulalume3@11: ulalume3@11: ulalume3@11: ulalume3@11: ulalume3@11: ulalume3@11: ulalume3@11: Adding equipment — Single Calculus Chain 0.2 documentation ulalume3@11: ulalume3@11: ulalume3@11: ulalume3@11: ulalume3@11: ulalume3@11: ulalume3@11: ulalume3@11: ulalume3@11: ulalume3@11: ulalume3@11: ulalume3@11: ulalume3@11: ulalume3@11: ulalume3@11: ulalume3@11: ulalume3@11: ulalume3@11:
ulalume3@11:
ulalume3@11:
ulalume3@11:
ulalume3@11: ulalume3@11:
ulalume3@11:

Adding equipment

ulalume3@11:

After adding a system to the database, we need to add at least one telescope and one laser before you add a channel.

ulalume3@11:
ulalume3@11:

Telescope

ulalume3@11:

To add a new telescope, click on the HOI telescopes in the System settings panel. ulalume3@11: This will take you to a page with a list of all availabe telescopes that are connected with your station. ulalume3@11: This list should be empty if this is the first time you add a telescope.

ulalume3@11:

To add a new telescope to the database click on Add HOI telescope at the top right of the screen. ulalume3@11: This will take you to a new page were you can fill in the needed information. Once again, the fields in bold ulalume3@11: are mandatory and you will need to fill them before you can save you new telescope.

ulalume3@11:

The fields you need to add are:

ulalume3@11:
ulalume3@11:
Type
ulalume3@11:
The telescope type
ulalume3@11:
Diameter
ulalume3@11:
The diameter of the primary mirror in mm
ulalume3@11:
Focal length
ulalume3@11:
The equivalent focal length of the telescope in mm
ulalume3@11:
Full overlap height
ulalume3@11:
The height where the full overlap is achieved.
ulalume3@11:
ulalume3@11:

When you are done, press the save button at the bottom right of the page. If no errors are present, you will return to ulalume3@11: the telescope list page. Your new telescope should appear in the list.

ulalume3@11:
ulalume3@11:
ulalume3@11:

Laser

ulalume3@11:

To add a new laser, click on the HOI Laser in the System settings panel. ulalume3@11: This will take you to a page with a list of all availabe lasers that are connected with your station. ulalume3@11: This list should be empty if this is the first time you add a laser.

ulalume3@11:

To add a new telescope to the database click on Add HOI laser at the top right of the screen. ulalume3@11: This will take you to a new page were you can fill in the needed information. The fields in bold ulalume3@11: are mandatory and you will need to fill them before you can save you new telescope.

ulalume3@11:

The fields you need to add are:

ulalume3@11:
ulalume3@11:
Manufacturer
ulalume3@11:
The manufacturer of the telescope
ulalume3@11:
Model
ulalume3@11:
The model of the telescope
ulalume3@11:
Repetition rate
ulalume3@11:
The repetition rate in Hz
ulalume3@11:
Type
ulalume3@11:
The type of the laser (ex. Nd:YAG)
ulalume3@11:
ulalume3@11:

When you are done, press the save button at the bottom right of the page. If no errors are present, you will return to ulalume3@11: the laser list page. The new laser you added should be present there.

ulalume3@11:
ulalume3@11:
ulalume3@11: ulalume3@11: ulalume3@11:
ulalume3@11:
ulalume3@11:
ulalume3@11:
ulalume3@11:
ulalume3@11:

Table Of Contents

ulalume3@11: ulalume3@11: ulalume3@11:

Previous topic

ulalume3@11:

Adding a system

ulalume3@11:

Next topic

ulalume3@11:

Adding channels

ulalume3@11:

This Page

ulalume3@11: ulalume3@11: ulalume3@11: ulalume3@11:
ulalume3@11:
ulalume3@11:
ulalume3@11:
ulalume3@11: ulalume3@11: ulalume3@11: ulalume3@11: