binietoglou@2: Adding products
binietoglou@2: ===============
binietoglou@2: 
binietoglou@8: After completing all the information related to the your system, we need to specify which 
binietoglou@8: product we need to acquire.
binietoglou@8: To do this, click on the **Products** in the *Product settings* panel.
binietoglou@13: This will take you to a page with a list of all available products that are connected with your stations. This list should
binietoglou@8: be empty if this is the first time you add a product. 
binietoglou@8: 
binietoglou@8: To add a new product to the database click on **Add Products** at the top right of the screen.
binietoglou@8: This will take you to a new page were you can fill in the needed information. As before, the fields in **bold**
binietoglou@8: are mandatory and you will need to fill them before you can save you new system. 
binietoglou@8: 
binietoglou@8: For now you will need to fill in the following fields:
binietoglou@8: 
binietoglou@8: Product type
binietoglou@21:    Choose the type of this product. (Available products: Raman backscatter, Extinction only,  Combined Raman backscatter and extinction, Elastic backscatter retrieval)
binietoglou@8: 
binietoglou@8: Usecase
binietoglou@28:    The use-case number (an integer) based on the descriptions given in the usecase section (ex. 0). See the :ref:`usecase list<usecases>` for details. 
binietoglou@28: 
binietoglou@8:  
binietoglou@13: Product channels
binietoglou@13:    Here you need to specify the channels that are involved in the calculation of the product. If you run out of
binietoglou@13:    empty spaces you can add a new blank line by clicking on **Add another Product Channel**.
binietoglou@13: 
binietoglou@13: System products
binietoglou@13:    Here you need to specify the system that this product is related to. 
binietoglou@13:    
binietoglou@13: Next you will need to fill in various options in the **Product options** table. You will need to fill in the following:
binietoglou@8: 
binietoglou@13: Low range error threshold
binietoglou@21:    Specify the maximum acceptable error for altitudes **bellow** 2 km. (from 1% to 100%)
binietoglou@13:    
binietoglou@13: High range error threshold
binietoglou@21:   Specify the maximum acceptable error for altitudes **above** 2 km. (from 1% to 100%)
binietoglou@13:    
binietoglou@13: Detection limit
binietoglou@21:    The minimum value that your instrument can detect (in :math:`m^{-1}sr^{-1}` (backscatter) or in :math:`m^{-1}` (extinction))
binietoglou@13:    
binietoglou@13: Min height
binietoglou@21:    The minimum height for for which the product should be calculated (in meters) e.g., 500 m for extinction calculations
binietoglou@8:    
binietoglou@13: Max height
binietoglou@21:    The maximum height for for which the product should be calculated (in meters) e.g., 10000 m for extinction calculations
binietoglou@13: 
binietoglou@13: Preprocessing integration time
binietoglou@21:    The integrated time of the preprocessed data (in seconds) ex. 900 sec
binietoglou@13: 
binietoglou@13: Preprocessing vertical resolution
binietoglou@21:    The vertical resolution of the preprocessed data (in meters) ex. 60 m
binietoglou@13: 
binietoglou@13: Next depending on the product type you selected you have to fill the values in the tables below.
binietoglou@13: 
binietoglou@13: When you are done, press the **save** button at the bottom right of the page.
binietoglou@13: This will take you back to the list of your products. If everything went OK the new product you just added should appear
binietoglou@8: in the list.
binietoglou@8: 
binietoglou@8: We don't have to make any more changes in this part, so you can click on **Home** 
binietoglou@8: on the top left of the page to return to the starting page of the *admin section*.
binietoglou@8: