diff -r f6927689a3b2 -r 79fea4145278 docs/_build/html/tutorial/adding_telescopelaser.html --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/docs/_build/html/tutorial/adding_telescopelaser.html Fri May 11 13:25:05 2012 +0200 @@ -0,0 +1,169 @@ + + + + + + + + + Adding equipment — Single Calculus Chain 0.2 documentation + + + + + + + + + + + + + + + + + +
+
+
+
+ +
+

Adding equipment

+

After adding a system to the database, we need to add at least one telescope and one laser before you add a channel.

+
+

Telescope

+

To add a new telescope, click on the HOI telescopes in the System settings panel. +This will take you to a page with a list of all availabe telescopes that are connected with your station. +This list should be empty if this is the first time you add a telescope.

+

To add a new telescope to the database click on Add HOI telescope at the top right of the screen. +This will take you to a new page were you can fill in the needed information. Once again, the fields in bold +are mandatory and you will need to fill them before you can save you new telescope.

+

The fields you need to add are:

+
+
Type
+
The telescope type
+
Diameter
+
The diameter of the primary mirror in mm
+
Focal length
+
The equivalent focal length of the telescope in mm
+
Full overlap height
+
The height where the full overlap is achieved.
+
+

When you are done, press the save button at the bottom right of the page. If no errors are present, you will return to +the telescope list page. Your new telescope should appear in the list.

+
+
+

Laser

+

To add a new laser, click on the HOI Laser in the System settings panel. +This will take you to a page with a list of all availabe lasers that are connected with your station. +This list should be empty if this is the first time you add a laser.

+

To add a new telescope to the database click on Add HOI laser at the top right of the screen. +This will take you to a new page were you can fill in the needed information. The fields in bold +are mandatory and you will need to fill them before you can save you new telescope.

+

The fields you need to add are:

+
+
Manufacturer
+
The manufacturer of the telescope
+
Model
+
The model of the telescope
+
Repetition rate
+
The repetition rate in Hz
+
Type
+
The type of the laser (ex. Nd:YAG)
+
+

When you are done, press the save button at the bottom right of the page. If no errors are present, you will return to +the laser list page. The new laser you added should be present there.

+
+
+ + +
+
+
+
+
+

Table Of Contents

+ + +

Previous topic

+

Adding a system

+

Next topic

+

Adding channels

+

This Page

+ + + +
+
+
+
+ + + + \ No newline at end of file