diff -r 9d8809d48bba -r 98a251a75e80 docs/details/adding_products.rst
--- a/docs/details/adding_products.rst	Tue Feb 25 17:00:47 2014 +0200
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,111 +0,0 @@
-Adding products
-===============
-
-Depending on the product you need to produce, some of the following  tables need to be filled. 
-
-.. note::
-
-   This section is not up-to-date to the latest interface version. It will be updated shortly.
-
-
-Backscatter products
---------------------
-The following tables need to be filed for the various backscatter products.
-
-Backscatter calibrations 
-------------------------
-For backscatter (product types: Raman backscatter, Combined Raman backscatter and extinction, Elastic backscatter retrieval
-
-LowestHeight   
-   in meters, lowest height for reference height search
-
-TopHeight
-   in meters, maximum height for reference height search
-
-WindowWidth
-   in meters, width of the reference height interval
-
-calValue
-   backscatter ratio, e.g. 1 or 1.01
-   
-calRangeSearchMethod ID: 
-   always 0
-   
-   
-If done, you have to remember the ID for your backscatter calibration options an go the the specific tables below,
-
-for product type 0 and 2: Raman_backscatter_options
----------------------------------------------------
-
-Raman calculation method
-   at the moment, only 1
-   
-bsc cal options
-   insert ID from previous step
-   
-error method ID: 
-   at the moment, only 1
-   
-for product type 3: elast_backscatter_options
------------------------------------------------
-
- elast bsc method ID
-   at the moment, only 1 (iterative approach)
-   
-bsc cal options
-   insert ID from previous step
-   
-error method ID: 
-   at the moment, only 1
-      
-lr input id:
-   at the moment, only 1 (fixed LR)
-   
-fixed_lr
-   ... in sr, value of the used lidar ratio
-   
-iter_bsc_options
-   if, iterative approach is used, go to table iter_bsc_options and remember ID and insert here
-
-iter_bsc_options
-----------------
-
-iter conv crit
-   ...e.g. 0.1 (=10%) The iteration is stopped when the RELATIVE difference between the actual and the previous column integrated backscatter coefficients is below this value
-
-ram bsc method id
-   at the moment, only 1
-   
-max iteration count: 
-   maximum number of iteration steps   
-
-for product type 1: Extinction options
---------------------------------------
-
-Extinction method:
-   Standard: 1, (0 weighted linear fit, 1 non-weighted linear fit, 2 difference quotient, 3 polynomial sec order fit, 4 quadratic function, 5 Savitzky-Golay filter, 6 Russo)
-
-error method ID: 
-   at the moment, only 1
-   
-overlap file ID:
-   if overlap file is available, enter ID here
-   
-angstroem: 
-   used angström value for the extinction calculation, e.g. 0,1, or 1.5
-   
-for product type 2: Ext bsc options
------------------------------------
-
-product ID
-   ID of product type 2
-   
-extinction option product ID
-   ID of the extinction product (see table products)
-   
-raman backscatter options product ID
-    ID of the Raman backscatter product (see table products)
-    
-error method ID: 
-   at the moment, only 1
-