diff -r 52af8fbed3d7 -r c675d086f7d2 docs/_build/html/tutorial/adding_telescopelaser.html --- a/docs/_build/html/tutorial/adding_telescopelaser.html Fri May 11 14:11:05 2012 +0200 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,169 +0,0 @@ - - - - - - - - - Adding equipment — Single Calculus Chain 0.2 documentation - - - - - - - - - - - - - - - - - -
-
-
-
- -
-

Adding equipment

-

After adding a system to the database, we need to add at least one telescope and one laser before you add a channel.

-
-

Telescope

-

To add a new telescope, click on the HOI telescopes in the System settings panel. -This will take you to a page with a list of all availabe telescopes that are connected with your station. -This list should be empty if this is the first time you add a telescope.

-

To add a new telescope to the database click on Add HOI telescope at the top right of the screen. -This will take you to a new page were you can fill in the needed information. Once again, the fields in bold -are mandatory and you will need to fill them before you can save you new telescope.

-

The fields you need to add are:

-
-
Type
-
The telescope type
-
Diameter
-
The diameter of the primary mirror in mm
-
Focal length
-
The equivalent focal length of the telescope in mm
-
Full overlap height
-
The height where the full overlap is achieved.
-
-

When you are done, press the save button at the bottom right of the page. If no errors are present, you will return to -the telescope list page. Your new telescope should appear in the list.

-
-
-

Laser

-

To add a new laser, click on the HOI Laser in the System settings panel. -This will take you to a page with a list of all availabe lasers that are connected with your station. -This list should be empty if this is the first time you add a laser.

-

To add a new telescope to the database click on Add HOI laser at the top right of the screen. -This will take you to a new page were you can fill in the needed information. The fields in bold -are mandatory and you will need to fill them before you can save you new telescope.

-

The fields you need to add are:

-
-
Manufacturer
-
The manufacturer of the telescope
-
Model
-
The model of the telescope
-
Repetition rate
-
The repetition rate in Hz
-
Type
-
The type of the laser (ex. Nd:YAG)
-
-

When you are done, press the save button at the bottom right of the page. If no errors are present, you will return to -the laser list page. The new laser you added should be present there.

-
-
- - -
-
-
-
-
-

Table Of Contents

- - -

Previous topic

-

Adding a system

-

Next topic

-

Adding channels

-

This Page

- - - -
-
-
-
- - - - \ No newline at end of file