|
1 From folder C:\Users\volker\Documents\atmospheric_lidar_ghk |
|
2 Running prog lidar_correction_ghk_0.9.8d_Py3.7.py |
|
3 Version 0.9.8d |
|
4 Reading input file optic_input_example_lidar.py |
|
5 for Lidar system: xx , example lidar |
|
6 --- Input parameters: value ±error / ±steps ---------------------- |
|
7 Laser: DOLP = 0.9950± 0.0050/ 1; Rotation alpha = 0.0000± 2.0000/ 1 |
|
8 Diatt., Tunpol, Retard., Rotation (deg) |
|
9 Emitter 0.0000± 0.1000/ 0, 1.0000, 0±180/ 0, 0.0000± 1.0000/ 0 |
|
10 Receiver 0.0000± 0.2000/ 1, 1.0000, 0±180/ 0, 0.0000± 0.1000/ 0 |
|
11 Calibrator 0.9998± 0.0002/ 1, 0.4000, 0±180/ 3, 0.0000± 0.1000/ 0 |
|
12 --- Pol.-filter --- |
|
13 ERT, RotT : 0.0010± 0.0010/ 0, 0.0000± 1.0000/ 0 |
|
14 ERR, RotR : 0.0010± 0.0010/ 1, 90.0000± 1.0000/ 1 |
|
15 --- PBS --- |
|
16 TP,TS : 0.9500± 0.0100/ 1, 0.0050± 0.0010/ 1 |
|
17 RP,RS : 0.0500± 0.0000/ 0, 0.9950± 0.0000/ 0 |
|
18 DT,TT,DR,TR,Y : 0.9895, 0.4775, -0.9043, 0.5225, 1 |
|
19 --- Combined PBS + Pol.-filter --- |
|
20 DT,TT,DR,TR : 1.0000, 0.4750, -0.9999, 0.4975 |
|
21 LDRCal during calibration in calibration range: 0.200± 0.150/ 1 |
|
22 --- Additional ND filter attenuation (transmission) during the calibration --- |
|
23 TCalT,TCalR : 1.0000± 0.0100/ 0, 0.1000± 0.0010/ 1 |
|
24 |
|
25 Rotation Error Epsilon For Normal Measurements = False |
|
26 linear polarizer before receiver |
|
27 Parallel signal detected in transmitted channel |
|
28 RS_RP_depend_on_TS_TP = True |
|
29 |
|
30 IoutTp, IoutTm, IoutRp, IoutRm, It , Ir , dIoutTp, dIoutTm, dIoutRp, dIoutRm, dIt, dIr |
|
31 =========================================================================================================== |
|
32 GR , GT , HR , HT , K(0.004), K(0.02), K(0.1) , K(0.2) , K(0.3) , K(0.45) |
|
33 1.00000, 1.00000,-0.99490, 0.99499, 0.96129, 0.96248, 0.96796, 0.97382, 0.97880, 0.98502 |
|
34 =========================================================================================================== |
|
35 |
|
36 Errors from neglecting GHK corrections and/or calibration: |
|
37 LDRtrue, LDRunCorr,1/LDRunCorr, LDRsimx, 1/LDRsimx, LDRCorr |
|
38 0.00400, 0.00673, 148.53471, 0.00687, 145.62357, 0.00400 |
|
39 0.02000, 0.02316, 43.17641, 0.02362, 42.33019, 0.02000 |
|
40 0.10000, 0.10528, 9.49823, 0.10739, 9.31207, 0.10000 |
|
41 0.30000, 0.31044, 3.22120, 0.31665, 3.15806, 0.30000 |
|
42 0.45000, 0.46418, 2.15434, 0.47346, 2.11212, 0.45000 |
|
43 LDRsimx = LDR of the nominal system directly from measured signals without calibration and GHK-corrections |
|
44 LDRunCorr = LDR of the nominal system directly from measured signals with calibration but without GHK-corrections; electronic amplifications = 1 assumed |
|
45 LDRCorr = LDR calibrated and GHK-corrected |
|
46 |
|
47 Errors from signal noise: |
|
48 Signal counts: NCalT, NCalR, NILfac, nNCal, nNI = 50000, 50000, 2, 0, 0 |