--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/system_settings/optic_input_0.9.8e4-PollyXT_Lacros.py Fri May 29 23:37:07 2020 +0200
@@ -0,0 +1,190 @@
+# This Python script will be executed from within the main lidar_correction_ghk.py
+# Probably it will be better in the future to let the main script rather read a conguration file,
+# which might improve the portability of the code within an executable.
+# Due to problems I had with some two letter variables, most variables are now with at least
+# three letters mixed small and capital.
+# To be used with lidar_correction_ghk.py ver. 0.9.5 and larger
+
+# Do you want to calculate the errors? If not, just the GHK-parameters are determined.
+Error_Calc = True
+
+# Header to identify the lidar system
+EID = "li" # Earlinet station ID
+LID = "PollyXT Lacros Limassol" # Additional lidar ID (short descriptive text)
+print(" Lidar system :", EID, ", ", LID)
+
+# +++ IL Laser and +-Uncertainty
+Qin, dQin, nQin = 1.0, 0.0, 0 # second Stokes vector parameter; default 1 => linear polarization 0.999 => LDR = 0.0005
+Vin, dVin, nVin = 0.0, 0.0, 0 # fourth Stokes vector parameter; default 0 => corresponds to LDR 0.0005 with DOP 1
+RotL, dRotL, nRotL = 90.0, 1.0, 1 #alpha; rotation of laser polarization in degrees; alle wellenlängen im PollyXT Lacros sind vertical zum opt. Tisch polarisiert.
+
+# +++ ME Emitter optics and +-Uncertainty; default = no emitter optics
+DiE, dDiE, nDiE = 0.0, 0.02, 0 # Diattenuation
+TiE = 1.0 # Unpolarized transmittance
+RetE, dRetE, nRetE = 0., 180., 0 # Retardance in degrees
+RotE, dRotE, nRotE = 0., 1.0, 0 # beta: Rotation of the optical element in degrees
+
+# +++ MO Receiver optics including telescope
+DiO, dDiO, nDiO = 0.0, 0.0, 0 # Diattenuation
+TiO = 1.0 # Unpolarized transmittance
+RetO, dRetO, nRetO = 0., 180., 0 # Retardance in degrees
+RotO, dRotO, nRotO = 0., 0.5, 0 # gamma: Rotation of the optical element in degrees
+
+# +++++ PBS MT Transmitting path defined with TS, TP, PolFilter extinction ratio ERaT, and +-Uncertainty
+# --- Polarizing beam splitter transmitting path
+TP, dTP, nTP = 0.50, 1.0, 0 # transmittance of the PBS for parallel polarized light
+TS, dTS, nTS = 0.50, 1.0, 0 # transmittance of the PBS for cross polarized light
+RetT, dRetT, nRetT = 0.0, 180., 0 # Retardance in degrees
+# --- Pol.Filter behind transmitted path of PBS
+ERaT, dERaT, nERaT = 0.00075, 0.00025, 0 # Extinction ratio
+RotaT, dRotaT, nRotaT = 0., 1., 1 # Rotation of the Pol.-filter in degrees; usually close to 0° because TP >> TS, but for PollyXTs it can also be close to 90°
+# --
+TiT = 0.5 * (TP + TS) # do not change this
+DiT = (TP-TS)/(TP+TS) # do not change this
+DaT = (1-ERaT)/(1+ERaT) # do not change this
+TaT = 0.5*(1+ERaT) # do not change this
+
+# +++++ PBS MR Reflecting path defined with RS, RP, and cleaning PolFilter extinction ratio ERaR and +-Uncertainty
+# ---- for PBS without absorption the change of RS and RP must depend on the change of TP and TS. Hence the values and uncertainties are not independent.
+RS_RP_depend_on_TS_TP = True
+# --- Polarizing beam splitter reflecting path
+if(RS_RP_depend_on_TS_TP):
+ RP, dRP, nRP = 1-TP, 0.00, 0 # do not change this
+ RS, dRS, nRS = 1-TS, 0.00, 0 # do not change this
+else:
+ RP, dRP, nRP = 0.5, 0.01, 0 # change this if RS_RP_depend_on_TS_TP = False; reflectance of the PBS for parallel polarized light
+ RS, dRS, nRS = 0.5, 0.01, 0 # change this if RS_RP_depend_on_TS_TP = False; reflectance of the PBS for cross polarized light
+RetR, dRetR, nRetR = 0.0, 180., 0 # Retardance in degrees
+# --- Pol.Filter behind reflected path of PBS
+ERaR, dERaR, nERaR = 1.0, 0.0, 0 # Extinction ratio
+RotaR, dRotaR, nRotaR = 0., 1., 0 # Rotation of the Pol.-filter in degrees; usually close to 90° because RS >> RP, but for PollyXTs it can also be close to 0°
+# --
+TiR = 0.5 * (RP + RS) # do not change this
+DiR = (RP-RS)/(RP+RS) # do not change this
+DaR = (1-ERaR)/(1+ERaR) # do not change this
+TaR = 0.5*(1+ERaR) # do not change this
+
+# NEW --- Additional ND filter transmission (attenuation) during the calibration
+TCalT, dTCalT, nTCalT = 1, 0.01, 0 # transmitting path, default 1, 0, 0
+TCalR, dTCalR, nTCalR = 1, 0.0001, 0 # reflecting path, default 1, 0, 0
+
+# +++ Orientation of the PBS with respect to the reference plane (see Improvements_of_lidar_correction_ghk_ver.0.9.8_190124.pdf)
+# Y = +1: polarisation in reference plane is finally transmitted,
+# Y = -1: polarisation in reference plane is finally reflected.
+Y = +1.
+
+# +++ Calibrator
+# --- Calibrator Type used; defined by matrix values below
+TypeC = 3 #Type of calibrator: 1 = mechanical rotator; 2 = hwp rotator (fixed retardation); 3 = linear polarizer; 4 = qwp; 5 = circular polarizer; 6 = real HWP calibration +-22.5°
+# --- Calibrator Location
+LocC = 3 #location of calibrator: 1 = behind laser; 2 = behind emitter; 3 = before receiver; 4 = before PBS
+# --- MC Calibrator parameters
+if TypeC == 1: #mechanical rotator
+ DiC, dDiC, nDiC = 0., 0., 0 # Diattenuation
+ TiC = 1.
+ RetC, dRetC, nRetC = 0., 0., 0 # Retardance in degrees
+ RotC, dRotC, nRotC = 0., 1.0, 1 #constant calibrator rotation offset epsilon
+ # Rotation error without calibrator: if False, then epsilon = 0 for normal measurements
+ RotationErrorEpsilonForNormalMeasurements = True # is in general True for TypeC == 1 calibrator
+elif TypeC == 2: # HWP simulated by rotator without retardance!
+ DiC, dDiC, nDiC = 0., 0., 0 # Diattenuation; ideal 0.0
+ TiC = 1.
+ RetC, dRetC, nRetC = 180., 0., 0 # Retardance in degrees
+ #NOTE: use here twice the HWP-rotation-angle
+ RotC, dRotC, nRotC = 0.0, 0.1, 1 #constant calibrator rotation offset epsilon
+ RotationErrorEpsilonForNormalMeasurements = True # is in general True for TypeC == 2 calibrator
+elif TypeC == 3: # linear polarizer calibrator. Diattenuation DiC = (1-ERC)/(1+ERC); ERC = extinction ratio of calibrator
+ DiC, dDiC, nDiC = 0.9985, 0.0005, 1 # Diattenuation; ideal 1.0
+ TiC = 0.4 # ideal 0.5
+ RetC, dRetC, nRetC = 0., 0., 0 # Retardance in degrees
+ RotC, dRotC, nRotC = 0.0, 0.1, 0 #constant calibrator rotation offset epsilon
+ RotationErrorEpsilonForNormalMeasurements = False # is in general False for TypeC == 3 calibrator
+elif TypeC == 4: # QWP calibrator
+ DiC, dDiC, nDiC = 0.0, 0., 0 # Diattenuation; ideal 0.0
+ TiC = 1.0 # ideal 0.5
+ RetC, dRetC, nRetC = 90., 0., 0 # Retardance in degrees
+ RotC, dRotC, nRotC = 0.0, 0.1, 1 #constant calibrator rotation offset epsilon
+ RotationErrorEpsilonForNormalMeasurements = False # is False for TypeC == 4 calibrator
+elif TypeC == 6: # real half-wave plate rotator calibration at +-22.5° => rotated_diattenuator_X22x5deg.odt
+ DiC, dDiC, nDiC = 0., 0., 0 # Diattenuation; ideal 0.0
+ TiC = 1.
+ RetC, dRetC, nRetC = 180., 0., 0 # Retardance in degrees
+ #Note: use real HWP angles here
+ RotC, dRotC, nRotC = 0.0, 0.1, 1 #constant calibrator rotation offset epsilon
+ RotationErrorEpsilonForNormalMeasurements = True # is in general True for TypeC == 6 calibrator
+else:
+ print ('calibrator not implemented yet')
+ sys.exit()
+
+# --- LDRCal assumed atmospheric linear depolarization ratio during the calibration measurements in calibration range with almost clean air (first guess)
+# LDRCal,dLDRCal,nLDRCal= 0.2, 0.15, 1 # spans most of the atmospheric depolarisation variability
+LDRCal,dLDRCal,nLDRCal= 0.009, 0.005, 1 # spans the interference filter influence
+
+# ====================================================
+# NOTE: there is no need to change anything below.
+# ====================================================
+# !!! don't change anything in this section !!!
+bPlotEtax = False # plot error histogramms for Etax
+# NEW *** Only for signal noise errors ***
+nNCal = 0 # error nNCal, calibration signals: one-sigma (fixed) in nNCal steps to left and right
+nNI = 0 # error nNI, 0° signals: one-sigma (fixed) in nNI steps to left and right; NI signals are calculated from NCalT and NCalR in main programm, but noise is assumed to be independent.
+
+# --- number of photon counts in the signal summed up in the calibration range during the calibration measurements
+NCalT = 40000 # default 1e6, assumed the same in +45° and -45° signals; counts with ND-filter TCalT
+NCalR = 40000 # default 1e6, assumed the same in +45° and -45° signals; counts with ND-filter TCalR
+NILfac = 1 # (relative duration (laser shots) of standard (0°) measurement to calibration measurements) * (range of std. meas. smoothing / calibration range); example: 100000#/5000# * 100/1000 = 2
+ # LDRmeas below will be used to calculate IR and IT of 0° signals.
+# calculate signal counts only from parallel 0° signal assuming the same electronic amplification in both channels; overwrites above values
+CalcFrom0deg = True
+NI = 100000000 #number of photon counts in the parallel 0°-signal 40000
+
+if(CalcFrom0deg):
+ # either eFactT or eFacR is = 1 => rel. amplification
+ eFacT = 1 # rel. amplification of transmitted channel, approximate values are sufficient; def. = 1
+ eFacR = 1 # rel. amplification of reflected channel, approximate values are sufficient; def. = 1
+ NILfac = 1 # (relative duration (laser shots) of standard (0°) measurement to calibration measurements) * (range of std. meas. smoothing / calibration range); example: 100000#/5000# * 100/1000 = 2
+
+ NCalT = NI / NILfac * TCalT * eFacT # photon counts in transmitted signal during calibration
+ NCalR = NI / NILfac * TCalR * eFacR # photon counts in reflected signal during calibration
+ # LDRmeas below will be used to calculate IR and IT of 0° signals.
+# NEW *** End of signal noise error parameters ***
+
+# --- LDRtrue for simulation of measurement => LDRsim
+LDRtrue = 0.004
+LDRtrue2 = 0.004
+
+# --- measured LDRm will be corrected with calculated parameters GHK
+LDRmeas = 0.3
+
+# --- this is just for correct transfer of the variables to the main file
+Qin0, dQin, nQin = Qin, dQin, nQin
+Vin0, dVin, nVin = Vin, dVin, nVin
+RotL0, dRotL, nRotL = RotL, dRotL, nRotL
+# Emitter
+DiE0, dDiE, nDiE = DiE, dDiE, nDiE
+RetE0, dRetE, nRetE = RetE, dRetE, nRetE
+RotE0, dRotE, nRotE = RotE, dRotE, nRotE
+# Receiver
+DiO0, dDiO, nDiO = DiO, dDiO, nDiO
+RetO0, dRetO, nRetO = RetO, dRetO, nRetO
+RotO0, dRotO, nRotO = RotO, dRotO, nRotO
+# Calibrator
+DiC0, dDiC, nDiC = DiC, dDiC, nDiC
+RetC0, dRetC, nRetC = RetC, dRetC, nRetC
+RotC0, dRotC, nRotC = RotC, dRotC, nRotC
+# PBS
+TP0, dTP, nTP = TP, dTP, nTP
+TS0, dTS, nTS = TS, dTS, nTS
+RetT0, dRetT, nRetT = RetT, dRetT, nRetT
+
+ERaT0, dERaT, nERaT = ERaT, dERaT, nERaT
+RotaT0,dRotaT,nRotaT= RotaT,dRotaT,nRotaT
+
+RP0, dRP, nRP = RP, dRP, nRP
+RS0, dRS, nRS = RS, dRS, nRS
+RetR0, dRetR, nRetR = RetR, dRetR, nRetR
+
+ERaR0, dERaR, nERaR = ERaR, dERaR, nERaR
+RotaR0,dRotaR,nRotaR= RotaR,dRotaR,nRotaR
+
+LDRCal0,dLDRCal,nLDRCal=LDRCal,dLDRCal,nLDRCal
\ No newline at end of file
