comparison: docs/_build/html/_sources/tutorial/adding_telescopelaser.txt
docs/_build/html/_sources/tutorial/adding_telescopelaser.txt
- changeset 14
- c675d086f7d2
- parent 13
- 52af8fbed3d7
- child 15
- f51ca1e515ac
equal
deleted
inserted
replaced
| 13:52af8fbed3d7 | 14:c675d086f7d2 |
|---|---|
| 1 Adding equipment | |
| 2 ================ | |
| 3 | |
| 4 After adding a system to the database, we need to add at least one telescope and one laser before you add a channel. | |
| 5 | |
| 6 Telescope | |
| 7 --------- | |
| 8 | |
| 9 To add a new telescope, click on the **HOI telescopes** in the *System settings* panel. | |
| 10 This will take you to a page with a list of all availabe telescopes that are connected with your station. | |
| 11 This list should be empty if this is the first time you add a telescope. | |
| 12 | |
| 13 To add a new telescope to the database click on **Add HOI telescope** at the top right of the screen. | |
| 14 This will take you to a new page were you can fill in the needed information. Once again, the fields in **bold** | |
| 15 are mandatory and you will need to fill them before you can save you new telescope. | |
| 16 | |
| 17 | |
| 18 The fields you need to add are: | |
| 19 | |
| 20 Type | |
| 21 The telescope type | |
| 22 | |
| 23 Diameter | |
| 24 The diameter of the primary mirror in mm | |
| 25 | |
| 26 Focal length | |
| 27 The equivalent focal length of the telescope in mm | |
| 28 | |
| 29 Full overlap height | |
| 30 The height where the full overlap is achieved. | |
| 31 | |
| 32 When you are done, press the **save** button at the bottom right of the page. If no errors are present, you will return to | |
| 33 the telescope list page. Your new telescope should appear in the list. | |
| 34 | |
| 35 | |
| 36 Laser | |
| 37 ----- | |
| 38 | |
| 39 To add a new laser, click on the **HOI Laser** in the *System settings* panel. | |
| 40 This will take you to a page with a list of all availabe lasers that are connected with your station. | |
| 41 This list should be empty if this is the first time you add a laser. | |
| 42 | |
| 43 To add a new telescope to the database click on **Add HOI laser** at the top right of the screen. | |
| 44 This will take you to a new page were you can fill in the needed information. The fields in **bold** | |
| 45 are mandatory and you will need to fill them before you can save you new telescope. | |
| 46 | |
| 47 The fields you need to add are: | |
| 48 | |
| 49 Manufacturer | |
| 50 The manufacturer of the telescope | |
| 51 | |
| 52 Model | |
| 53 The model of the telescope | |
| 54 | |
| 55 Repetition rate | |
| 56 The repetition rate in Hz | |
| 57 | |
| 58 Type | |
| 59 The type of the laser (ex. Nd:YAG) | |
| 60 | |
| 61 When you are done, press the **save** button at the bottom right of the page. If no errors are present, you will return to | |
| 62 the laser list page. The new laser you added should be present there. | |
| 63 | |
| 64 |
