--- a/docs/_build/html/_sources/tutorial/adding_telescopelaser.txt	Fri May 11 14:11:05 2012 +0200
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,64 +0,0 @@
-Adding equipment
-================
-
-After adding a system to the database, we need to add at least one telescope and one laser before you add a channel. 
-
-Telescope
----------
-
-To add a new telescope, click on the **HOI telescopes** in the *System settings* panel.
-This will take you to a page with a list of all availabe telescopes that are connected with your station. 
-This list should be empty if this is the first time you add a telescope. 
-
-To add a new telescope to the database click on **Add HOI telescope** at the top right of the screen.
-This will take you to a new page were you can fill in the needed information. Once again, the fields in **bold**
-are mandatory and you will need to fill them before you can save you new telescope. 
-
-
-The fields you need to add are:
-
-Type
-   The telescope type
-   
-Diameter
-   The diameter of the primary mirror in mm
-
-Focal length
-   The equivalent focal length of the telescope in mm
-   
-Full overlap height
-   The height where the full overlap is achieved.
-
-When you are done, press the **save** button at the bottom right of the page. If no errors are present, you will return to 
-the telescope list page. Your new telescope should appear in the list.
-
-
-Laser
------
-
-To add a new laser, click on the **HOI Laser** in the *System settings* panel.
-This will take you to a page with a list of all availabe lasers that are connected with your station. 
-This list should be empty if this is the first time you add a laser. 
-
-To add a new telescope to the database click on **Add HOI laser** at the top right of the screen.
-This will take you to a new page were you can fill in the needed information. The fields in **bold**
-are mandatory and you will need to fill them before you can save you new telescope.
-
-The fields you need to add are:
-
-Manufacturer
-   The manufacturer of the telescope
-   
-Model
-   The model of the telescope
-   
-Repetition rate
-   The repetition rate in Hz
-   
-Type
-   The type of the laser (ex. Nd:YAG)
-
-When you are done, press the **save** button at the bottom right of the page. If no errors are present,  you will return to 
-the laser list page. The new laser you added should be present there.
-
-